Redefining Your Rental Experience!

3-1/2 Ton Floor Jack

Jet, 5,000 LB Capacity, Pallet Truck, Fork Size 27" x 48", This Is The Standard Size Pallet Truck For Most Applications, 2-1/2" Low Profile Design For Smaller Size Pallet Openings, High Quality Welded Steel Construction With A Durable Powder Coat Finish, Easy To Use With Single Hand Operation, Fingertip Controls & A 180 Degree Turning Radius, Extra Wide Poly Over Steel Steer Wheels Provide A Smooth, Quiet Ride With Added Traction & Stability, Wheel Bearings Are Double Sealed & Lifetime Lubricated, 2 Year Warranty.

TV SKU 724565

250lb Rating

Model Podium Podio
250lb Rating

MFG MODEL #LP-2100-13   Long Body Ladder Jacks, 1 Pair, Holds Stages & Planks Up To 20" Wide, Spans 3 Extension Ladder Rungs, Features Six Pitch Adjustments, Folds For Easy Storage, For use with Type IAA, IA Fiberglass and Aluminum Extension Ladders

Jet, 20 Ton Capacity, Screw Jack , Model #SJ-20T, Closed Height 16", Extended Height 25", Screw Size 2" x 12", Bar Hole Size 13/16", Contractor Quality Mechanical Jack For All Purpose Lifts & Supports, Holds Heavy Loads Indefinitely, Will Not Creep, Easy To Carry & Position With Built In Handle, Turning Bar Included, True Value Item #440303, 5 Year Warranty.

TV SKU 724656

Jet, 22-1/2 Ton Capacity, Industrial Hydraulic Bottle Jack, Jet Model #JHI-22-1/2, Minimum Height 10-5/8", Maximum Height 16-7/8", Piston Height 6-1/4", For Lifting, Pushing, Spreading, Bending, Pressing Or Straightening, Not Affected By Temperature Extremes, Works In Upright, Angle Or Horizontal Position, Electrically Welded Base & Cylinders, Pump Handle Included, 2 Year Warranty.

TV SKU 724623

Direct Spark Ignition
Motor Overload Protection
High Temperature Safety Cutoff Switch
AGA & CGA Certified
One-Year Warranty
Includes:

Regulator
10' Gas Hose
High Temperature Safety Switch
Specifications:

Max BTU: 100,000 / Min BTU: 50,000
CFM: 350
Max Fuel Consumption: 4.6 lbs./hr.
Ignition Type: Direct Spark
Electrical Supply: 115V/60 Hz/1 Phase
Case Material: Steel with Tri-Shield Coating
Dimensions: 25.3" L x 9.8" W x 14" H
Weight: 22 lbs.
Shipping Weight: 28 lbs.
Heater Mounting: The Tradesman® Forced Air Heater should be mounted on a level, stable and noncombustible floor surface. Heater is not recommended for hanging.

LP (liquid propane) and NG (natural gas) models available
Lightweight for easy maneuverability
Piezo pilot ignition
Direct-fired = 99.97% fuel efficiency
Enclosed stainless steel burner provides superior wind resistance
360° heat output
One piece barrel, no assembly required
100% test fired at our plant
CSA US and Canada certified

• 6 cubic foot corrosion proof poly tray
• Durable steel undercarriage
• Strong steel handles with Total Control grips

TV SKU 173685

7" Large Angle Grinder With 2 Finger Lock On Trigger Switch. High Power 15A AC/DC 4 HP (Maximum Motor HP) 8,000 RPM Motor With Overload Protection Provides Higher Operating Speeds Under Load. Use Wheels Rated At 8,500 Or Higher. Epoxy Coated Field And Armature Provide Long Service Life Against Abrasion From Airborne Debris. Keyless Adjustable Guard Allows For Guard Adjustments To Be Made Without Tools. Low Profile Gear Case Allows For Work In Tight Areas. Automatic Turn-Off Brushes Shut Down The Tool When Brushes Need To Be Changed To Avoid Tool Damage. 5 Position Side Handle Provides Improved Ergonomics For Specific Applications. 2-Wire Double Insulated 'S' Jacket Rubber Cord Provides Increased Durability & Life In Hot & Cold Climates. 5/8"-11 Spindel thread. Includes: 7" Guard, 7" Grinding Wheel And 5 Position Handle.

The unique design of this post hole digger keeps your hands from touching during use and results in less effort required while working. The pointed blade tips make digging easier, and the head design allows you to securely transport dirt from the hole. Textured fiberglass handles provide a firm grip and are notched at the ends to aid during dirt transport.

With temperature selections at 200°, 500°, 800°, and 1050°F.
Easily remove paint, adhesives, caulk, putty and more with the concentrated heat output. This product is also handy for thawing frozen pipes, drying plaster, loosening rusted bolts, and forming and bending metals.

TSURUMI TPG4 Series Generators are designed to withstand the severe conditions of construction jobsites or industrial applications, especially where extra durability and dependable, stable power are required. Ideal to supply the power to Tsurumi’s single-phase submersible pumps and all your electrical power tools such as drills, saws, lighting and heaters. 3600 Watts
120/240 VOLTS

TSURUMI TPG4 Series Generators are designed to withstand the severe conditions of construction job sites or industrial applications, especially where extra durability and dependable, stable power are required. Ideal to supply the power to Tsurumi’s single-phase submersible pumps and all your electrical power tools such as drills, saws, lighting and heaters. 3,000 WATTS - 120 VOLTS

TANK CAPACITY  18.0 L (4.75 gals.)
 
WORKING PRESSURE  40 psi +/- 10% 

WEIGHT WITHOUT LIQUID  5.1 kg (11.2 lbs.)

MFG MODEL # MFSM24R-X   24" Magnetic Floor Sweeper With Release Lever & Heavy Duty Reinforced Handle, Great For Cleaning Up Nails, Screws, Debris From Store Aisles, Parking Lots, Lumber Yards

TV SKU 652461

The Garrett ACE 250 is very user friendly and comes with a DVD and Book teaching everything a beginner needs to know to get started with detecting - if you don’t want to go looking around on how to get started with metal detecting, then this pack is for you. This detector comes automatically adjusted for ground minerals.

The MS 192 TC is affordably priced and packed with premium features that save time and money. Professional arborist and tree service personnel will appreciate its robust power-to-weight ratio and compact, ergonomic top-handled design for easier equipment handling and less operator fatigue on demanding jobs. The tool’s fuel efficient engine technology reduces fuel costs and emissions*.

A robust all around chainsaw, ideal for demanding cutting jobs where more power is required for a longer guide bar. Equipped with X-Torq® engine with high torque over a wide rpm range. The saw’s body is ergonomically designed allowing for easy handling of the saw’s power. Further features include Smart Start®, Air Injection, LowVib® and combined choke/stop control.

Designed for professionals, the Husqvarna 525P5S pole saw with detachable shaft gives you longer reach and easy transporting between work sites. Low weight, excellent ergonomics and superior balance help you work comfortably even with less accessible vegetation. Easy to man-oeuvre, its X-Torq® engine ensures rapid acceleration and high torque with low emissions and low fuel consumption.

 Cylinder displacement
 25.4 cm³ 
 Power output  1.34 hp
 Length, extended, including cutting equipment
 137.8 in 
 Weight (excl. cutting equipment)

Long lasting high gloss powder coat finish
Heavy duty 4 bolt trailer hubs for towing
E-Z lift hinge one hand lift to vertical operation
Heavy duty steel fenders
Heavy duty crank down wheel jack for easy moving
Spring loaded vertical and horizontal rail locks
High pressure hoses on both the pressure & return side
2" hitch coupler
Log Dislodger Standard
Heavy duty 2 x 3 box tube tongue
 
Specifications
Cylinder 4" X 24" clevis type, 1.75" rod
Valve 3 Position with Auto Return
Pump 11 GPM HI-LO 2 Stage
Hydraulic System 9.5 Gallons System Total
Engine Options 160cc Honda GX
Bed Height 33"
Beam 6" heavy-duty formed steel
Tires 4.80 X 8.00 Highway Rated
Log Opening 25"
Cycle Time Appox. 12 Seconds Complete Cycle
Splitting Force Appox. 22 tons
Weight 660 lbs.

A true professional saw in the larger mid-size class, built for very demanding applications. Equipped with X-TORQ engine with reduced fuel consumption and exhaust emissions. The crankcase and crankshaft are extra heavy-duty and the carburator has vibration damping in order to handle high speeds and high loads. The saw combines low weight, high power and rapid acceleration with flexible operation.

 Cylinder displacement 70.7 cm³
 Power output 5.5 hp

TV SKU   597693

Multi-Head Crimp Tool Kit, To Crimp 3/8", 1/2", 3/4" & 1" Pex Tube, Comes With A Go/No-Go Gauge, 6" Handle & Provides About 5,000 LB Of Crimping Force.