Redefining Your Rental Experience!

TV SKU 173685

7" Large Angle Grinder With 2 Finger Lock On Trigger Switch. High Power 15A AC/DC 4 HP (Maximum Motor HP) 8,000 RPM Motor With Overload Protection Provides Higher Operating Speeds Under Load. Use Wheels Rated At 8,500 Or Higher. Epoxy Coated Field And Armature Provide Long Service Life Against Abrasion From Airborne Debris. Keyless Adjustable Guard Allows For Guard Adjustments To Be Made Without Tools. Low Profile Gear Case Allows For Work In Tight Areas. Automatic Turn-Off Brushes Shut Down The Tool When Brushes Need To Be Changed To Avoid Tool Damage. 5 Position Side Handle Provides Improved Ergonomics For Specific Applications. 2-Wire Double Insulated 'S' Jacket Rubber Cord Provides Increased Durability & Life In Hot & Cold Climates. 5/8"-11 Spindel thread. Includes: 7" Guard, 7" Grinding Wheel And 5 Position Handle.

MFG MODEL #4H0101N   Framepro 325FRHXP, Full Round Head Framing Nailer, 20 Degree, Plastic Strip Collation, Low Profile Design, Easily Fits Between Studs & Joists, Patented Drive Selector For Contact Or Sequential Firing Action, Patented True Drive Magazine Reduces Jams & Mis-Feeds, Well Balanced, Ergonomic Design, Retractable Rafter Hanger, Uses Less Air To Drive Nails, Highly Efficient Internal Design

TV SKU 184487

This 16-Gauge Strip Straight Finish Nailer is excellent for fastening 3/4 - 2-1/2 in. nails in moldings, chair rails, door casings, cabinetry and furniture construction. The convenient design allows you easily change the depth drive and adjust the 360 Degree air exhaust without needing any tools. A no-mar tip leaves only a small trace on the work surface to save you time during finishing applications.

Removes up to 200 sq. ft. per hour of 4″ ceramic tile set in standard thin-set. Provides 2,500 hits per minute. ALR-E Ergonomic design lets operator stand upright eliminating backaches. High-strength tubular handle and soft foam hand grips for operator comfort. Quick-change, hardened steel tool chuck accepts dozens of accessories. Available in heavy-duty steel or lightweight aluminum. Requires only 6-8 CFM at 80-90 PSI.

The AirPath from Dri-Eaz lets you dry all types of carpets and hard floors in minutes, not hours. Offering an innovative 360° outlet grill design and 40 mph airflow, the AirPath lets you tackle the toughest floor drying challenges fast and effectively. 

Motor: Quiet operation · Self-cooling motor design

Components: Exhaust air ducting reduces the possibility of motor contamination by dirt or moisture · 25-foot electrical cord · Electrical cord wrap · Recessed wheels and clamps · Filter efficiency 99.5% to 1.0-micron (optional HEPA filter 99.7% to 0.3-micron) · Drain outlet · High impact poly construction canister with lifetime canister warranty · Industrial-grade polyolefin wheels with stainless-steel shafts

Miscellaneous: Stackable design for easy storage · Filter decreases airborn particles through exhaust · CSA certified · Hydro flow filter for wet or dry applications - no conversion necesary

Perfectly tapered forged alloy steel.
Wide blade drives carpet into the gully fast.
Holds up to hammering.

All steel design with rubber grip handle.
Blade Holder can be reversed to make cuts next to the wall.
Adjusts in and out for different heights.

12x18 orbital sander with dust containment. Use a white or red 12x18 scrub pad as the base to attach the sandpaper. Perfect for a light screen and recoat, parquet floors, landings, closets and decks. This sander can be hooked into a tank vacuum.

7" edge sander. Complete with carrying case and paper changing tool. Aggressive, professional results

8" drum sander with an expandable drum. Removable handle and dust shoot makes for easy transportation. Drum lowering handle keeps the unit on a steady three point stance and delivers smooth cutting to the floor. This sander can be hooked into a tank vacuum

The Powr-Flite P131-7 13" Floor Machine provides the power and durability for the toughest jobs in a convenient, easy to maneuver size. The P131-7 is the perfect size for stripping, scrubbing, spray buffing or bonnet cleaning areas where a regular sized floor machine won't fit.

The 470 Portamatic TL pneumatic flooring nailer is designed to nail ¾” thick wood flooring and includes a shoe pad for nailing ½” wood flooring Designed to accept 1-1/ 2 or 2” Flooring nails T OR L Flooring nails. You choose the Porta-Nail flooring fastener T or L based on the style you are now using or style that is readily available to you. Operates at 70-90 PSI @ 3.5 cfm. A light tap of the mallet ensures the Porta-Nail is set tight in the proper location every time for a wood floor that stays put. The Portamatic TL is light weight; easy to use has an integrated safety to prevent accidental discharge. Porta-Nails 16 ga. flooring nails are made of the finest materials and well defined serrated barbs to provide superior holding power and will not let go. Porta-Nails are also available in stainless steel for ACQ treated materials. Cat # 47090 Wide Profile Shoe is available to position Portamatic TL in front of tongue to provide balance and protecti

PNI’s 418A Portamatic Evolution is designed to give you tight floors and exact nail placement for 3/8" to 5/8" Engineered and Horizontal or Vertical Grain Bamboo flooring requiring the use of an 18 ga nail to reduce the risk of splitting the tongue of the wood or dimpling the top prefinished surface. (Nails are available in lengths of 1-1/4 In. # 41801 and 1-1/2 In. # 41802) Today’s imported and prefinished floors need special attention for the nail placement and protecting the top edge of the factory finish. The 418A delivers with an 18 ga nail and adjustable base plate second to none. First, it sets against the front of the tongue, reducing the risk of damaging the top edge of the flooring. Second, it features a shim-less height adjustment through the action of an easy to adjust cam mechanism.

The easy to use 402 Porta Nailer is the finest most versatile flooring nailer on the market and comes ready to angle nail 5/8, 3/4 and 33/32 In. thick tongue and groove flooring. The nailer will also nail 3/8 -9/16 In. floors, metric configurations including bamboo and can be converted for face nailing by changing accessory shoes (sold separately). PNI’s "Preferred-Seating" System uses an exclusive ratcheting ram to ensure nails are properly seated and flooring strips are tightly driven together. The patented "anti-split" nail cuts through wood without splitting your floor and three lengths of nails will insure you have the right fastener for the job. The nail’s wide head and grapple barb design provides superior holding power. Porta-Nailers are world-renowned by professionals and do-it yourselfers alike and are designed to protect today’s Pre Finished Surfaces and positions easily on your wood floor to insure proper nail placement. Made with

Patented self-adjusting, self-leveling brush and vacuum shoe for easy cleaning of all carpet lengths and uneven floors plus longer brush life. Full compliment of optional accessories attaches to back of unit for cleaning upholstery, stairs, etc. Handle adjusts to operator height and folds down for easy storage. Patented lift-off bucket with bladder makes filling and empltying incredibly easy. See-through recovery dome. Side extension for cleaning rght to baseboards. Upright- mounted motor and intercooler system combine for long-lasting operation

3/4Hp-115v Tile Stripper.

Used for removing vinyl tile, linoleum tile, VCT and carpeting.

Electric 110 volt 16 amp dual motor
Vac system ideal for fine dust removal
9 gallon capacity
94″ lift column
25 ft, 2″ diameter hose included
200 CFM
13 Sq. ft. of filter area
Micro-clean filter guaranteed for 3 years
Comes Standard with Wand Kit for floor cleaning

Used with EDCO Grinders, scarifiers, turbo grinders for containing airborne concrete dust.

Deluxe Carpet Steam Roller is a tool used in rolling over seams in carpet to make them even in height.

• Made with 3 offset rollers 
• Wide 4-1/2" rollers

JR Power Carpet Stretcher Kit is for stretching and flatteneing of carpet.

Knee Kicker is for stretching and flattening of carpet.

• Five setting length adjustment channel that extends from 17 1/2" to 21 1/2" 
• Recessed trigger firmly locks to desired length 
• Three nap grips and 16 adjustable steel pins 
• Pin depth is adjusted with top pin dial

Linoleum Roller is a tool used to flatten, smooth and apply weight when installing adhesive backed linoleum.