Redefining Your Rental Experience!

12,000 to 21,000 oscillations per minute
• 250-watt motor, electronic speed control, and 16.4-foot cord
• Works with wide range of Fein accessories
• Carrying case included
• Versatile professonal high-precision specialist tool

Manual not included, has a cd.  Corded tool.

•Cord or battery compact worksite radio with a heavy-duty design and roll cage withstands tough jobsite conditions
•3.5mm auxiliary cable included to connect to CD, MP3, portable satellite receivers and other digital audio devices
•AC power cord or 18-volt NiCd/Li-ion, 12-volt max or 20-volt max DEWALT power tool batteries required (not included)
•USB power port allows you to easily charge the radio
•Device storage box protects radio from jobsite debris and damage for durability
•Heavy-duty design, with roll cage, increases durability to withstand jobsite conditions
•Runs off AC or battery power only - radio does not charge batteries

The Tracked Mud Buggy represents the ultimate in productivity, jobsite efficiency and ROI - with controls that are intuitive and easy-to-use, superior traction and maneuverability, high weight carrying capacity and a powerful engine.

• 25 HP (18.6 kW) Kohler Command Pro Series CH 740
• Patented, easy-to-use traction control system
• 34.5" width with bucket
• Turf friendly at only 1882 pounds

Rental rate includes choice of 36" bucket, 42" bucket or forks. Also available at additional rate:

• Auger Power Head Attachment
• Trencher Head Attachment
• Stump Grinder Attachment

Great for finishing basements and garage floors or patching and repairing on larger jobs. The PT-36 has a diameter of 36" (92 cm) for smaller concrete slabs and hard to reach areas where your ride-on trowel cannot go.

Our Cut-n-Break method is the natural choice when you need to cut deep but want a machine with low tool and maintenance costs. The K 3000 Cut-N-Break enables you to cut as deep as 16" from one side. Suitable for flush cutting close to walls and floors as well as for smaller jobs like window openings where you want to avoid overcutting at the corners.

Electric Eel Model E-1/2"X50 Sewer Auger Drain 1/2" x 50', Electric Drain Cleaner, Cleans 1" To 3" Diameter Drain Lines, Heavy Duty, 1/3 HP Baldor Motor, Built In Dual Disk Slip Clutch Adds Cable Life, Inner Drum Prevents Cable Tangling In Cage, Cable Cage Epoxy Powder Coated To Resist Corrosion, Rear Bar Protects Motor & Allows For 2 Position Operation, Cord organizer For Easier Transport, Inner Core Cable Constructed Of Genuine Galvanized Aircraft Wire, 20' Power Cord With GFI Safety Feature, Easy To Use Air Operated Foot Switch, Includes 3 Piece Tool Set. TVSKU 754366 aka snake

Powder coated steel cage rotates freely. Self-aligning bearings. Thumbscrew locks cable at front of cage. Comes with 1/2" diameter monowire cable or 1/2" aircraft wire reinforced inner core cable.

Removes up to 200 sq. ft. per hour of 4″ ceramic tile set in standard thin-set. Provides 2,500 hits per minute. ALR-E Ergonomic design lets operator stand upright eliminating backaches. High-strength tubular handle and soft foam hand grips for operator comfort. Quick-change, hardened steel tool chuck accepts dozens of accessories. Available in heavy-duty steel or lightweight aluminum. Requires only 6-8 CFM at 80-90 PSI.

The AirPath from Dri-Eaz lets you dry all types of carpets and hard floors in minutes, not hours. Offering an innovative 360° outlet grill design and 40 mph airflow, the AirPath lets you tackle the toughest floor drying challenges fast and effectively. 

Motor: Quiet operation · Self-cooling motor design

Components: Exhaust air ducting reduces the possibility of motor contamination by dirt or moisture · 25-foot electrical cord · Electrical cord wrap · Recessed wheels and clamps · Filter efficiency 99.5% to 1.0-micron (optional HEPA filter 99.7% to 0.3-micron) · Drain outlet · High impact poly construction canister with lifetime canister warranty · Industrial-grade polyolefin wheels with stainless-steel shafts

Miscellaneous: Stackable design for easy storage · Filter decreases airborn particles through exhaust · CSA certified · Hydro flow filter for wet or dry applications - no conversion necesary

Compressor Pump: Quality cast iron single stage compressor · Durable stainless-steel braided discharge hose for longer life · Splash lubricated cast iron crankcase to extend the hours of performance · Cast iron head for heat dissipation · Large canister intake filter · Oil level sight indicator

Generator: Brushless alternator · Industrial 1800-watt generator with two NEMA 5-15R receptacles · Total harmonic distortion (THD) less than 5% · 100% copper windings

Engine: Industrial Honda OHV engine, 8 gallon

This 40 foot aluminum industrial extension ladder has a 300 lb load capacity. It features outside slide guides, D-shaped rungs fully serrated for a slip resistant surface, mar-resistant rail end caps, QuickLatch rung lock for better secure operations and swivel safety shoes to be used as tread down or in a spiked position.

A 12 foot non-conductive fiberglass industrial step ladder capable of holding a load capacity of 375lbs. Equipped with heavy guage metal top, slip-resistant rubber feet, and heavy duty gusset bracing.

This 32 foot fiberglass extension ladder comes with a 300lb load capacity.The ladder features outside the ProTop with tool slots and a V-shaped corner grip to provide stability on work surfacese. Also has slide guides, D-shape rungs fully serrated for slip resistant surface, non marring rail end caps, QuickLatch rung lock for better secure operation and swivel safety shoes to be used as tread down or in spike position.

This 24 foot fiberglass extension ladder comes with a 300lb load capacity.The ladder features outside the ProTop with tool slots and a V-shaped corner grip to provide stability on work surfacese. Also has slide guides, D-shape rungs fully serrated for slip resistant surface, non marring rail end caps, QuickLatch rung lock for better secure operation and swivel safety shoes to be used as tread down or in spike position.

General purpose blade for cutting masonry, tile, brick, and concrete. Can be used for dry or wet cutting.

TS 70 is the perfect choice for fast and effective cutting of materials up to 28 inches in length. The optional adjustable stand enables one person to move the TS 70 around the jobsite. With the optional stands the tile saw can easily be positioned to various heights or collapsed with one hand. The quick and easy set up gives you more time for cutting. The water management system minimizes the water use for a clean work area. The machine is equipped with a separate water tank which supplies all water needed and facilitates the slurry sedimentation. Delivered with VARI-CUT™ tile blade.

TOWING VEHICLE MUST BE AT LEAST 3/4 TON PICKUP & 2 5/16" ball
Towing vehicle is required to be wired for electric brakes with a control module in the cab

This quality pan tilt-bed trailer, built by Novae, is designed to handle low riding equipment as well as four wheelers, lawn mowers, motorcycles, snow mobiles, and a variety of other equipment.

A Cushion Cylinder greatly reduces the speed of the tilt. This allows the trailer to have a smooth transition between the hauling and tilting functions. No more bone jarring, equipment damaging jolts as the tilt bed closes back down on the frame.

5"x2" Tube Tongue, Cushion Clylinder, C-channel crossmembers, Protected wiring, Rubber mounted sealed lights, Four heavy duty D-rings, 7k Drop Leg jack and 2"x6" Oak Decking are the main features of this trailer.

The undercarriage includes a 6,000 lb Torsion axle with Hydraulic brakes, 15" new wheels and tires and an A-frame tongue with a 2-5/16" coupler. The pow

TEX P90 was developed to meet the tough requirements found, for example, in the rental industry. TEX P90 is our most powerful demolition breaker, especially suitable for breaking hard reinforced concrete or other tasks where real power is required.

TEX P60 was developed to meet the tough requirements found, for example, in the rental industry. TEX P60 is ideal for breaking asphalt, especially suitable for breaking hard reinforced concrete or other tasks where real power is required.

Perfectly tapered forged alloy steel.
Wide blade drives carpet into the gully fast.
Holds up to hammering.

All steel design with rubber grip handle.
Blade Holder can be reversed to make cuts next to the wall.
Adjusts in and out for different heights.

The new 18" Hydro Sod Cutter is the easiest to operate and most comfortable to use sod cutter on the market. With variable ground speeds - forward and reverse - and intuitive controls this versatile machine is the perfect workhorse for the weekend warrior to the seasoned pro.