Redefining Your Rental Experience!

The FS 400 series walk behind saws are true multi-purpose concrete saws, available with 11 hp Honda gas engines. They are compact and developed with a clear focus on ergonomics, making them ideal for small to mid-sized jobs.

11″ Working width will grind approximately 200-250 sq. ft. per hour at 1/32″ with EDCO Dyma-Serts
Round shroud gets tight against walls
Easy-rolling 10″ steel-core, rubber wheels
Lifting eye for easy loading and unloading
Includes 1 multi-accessory discs, which accept Dyma-Serts, Strip-Serts and all other grinder accessories
3 grinding accessories required per loading
2″ Vacuum port and water port
25ft. Power cord attached with cord hanger
Accessory Toolbox tray
Side-mounted lifting handles
Easy access to grease fittings
30lb. weight pack standard
Rugged and easy to maintain
Model # SEC-NG-16L

This nine cubic-foot, heavy-duty side-dump mixer.

Heavy-duty cantilever springs provide smoother towing.
Reinforced cowl provides superior engine protection and ventilation while allowing easy access.
Oversized, heavy-duty steel paddles for fast, complete mixing

6', 1-3/4" Diameter, Aluminum Threaded Bull Float Handle, Blue Anodized Coated Handle Preferred By Contractors, Will Not Leave Dirty Marks On Hands.  We carry a quantity of 6 handles that can extend your reach to a maximum of 36 feet.

TV SKU 572646

48", Magnesium Bull Float With Bracket, Use Threaded Handles, 12-115.

TV SKU 572653

13-amp reciprocating saw delivers increased power for heavy-duty applications in wood and metal
 
•
Variable-speed (0-2,700-SPM) trigger switch and selector wheel control speed of the tool
 
•
Orbital action allows for fast cutting of wood

TV SKU  484170

Red Fence Post Driver With Pin, Minimizes Damage To Tops Of Fence Posts, 23-1/2" Length With Weighted & Reinforced Steel Head, 2-7/8" Inside Driver Diameter, Eases Work For Driving Fence Posts With 17 LB Of Power, Handles Are Tapered For Comfortable Hand Placement

Bosch Hammer Drill 1/2"

Includes grinder, 4 in. grinding wheel, wheel guard, lock nut, side handle, inner flange and case
6 Amp motor maintains performance during extended use with speeds up to 11,000 RPM
Sliding switch for convenient operation within easy reach of the handle
4 in. grinding wheel for a variety of applications
5/8 in. arbor allows you to fit many accessories
Spindle lock for convenient accessory changes
8.2 in. power cord allows you freedom to move around while you work
Side, barrel-grip handles for added comfort

Powerful 15 AMP motor for a high power-to-weight ratio
Lower guard design improves performance when making bevel and narrow cuts
Well-balanced design for superior handling and performance
Large cutting capacity (2-1/2" at 90º, 1-3/4" at 45º and 1-3/8" at 56º)
Bevel cuts 0°-56° with positive stops at 22.5º, and 45º and 56º for quick settings
Large and easy to read markings on depth and bevel scales

Variable speed control dial (10,000 - 30,000 RPM) enables user to match the speed to the application
Smooth rack-and-pinion fine depth adjustment system for more precise settings
Slim and ergonomically designed body for increased comfort and control
Quick release cam lock system for easy depth adjustments and base removal/installation
Electronic speed control maintains constant speed under load
Soft start feature for smooth start ups
Base accepts industry standard template guides

Manual level in horizontal and vertical planes
Simultaneous 90 degrees split beam in vertical mode
Illuminated vials for easy reading in all conditions
Rotation speed from 0 to 600 RPM. Multi-functional adjustable base and mounting bracket
Normal operation of 40-0922 Lasers make a clicking sound when rotating.

2.3 amp motor delivers 13,000 - 19,000 OPM to ensure fast, smooth results on all surfaces
True orbital finishing sander motion, with no arcing or pivoting motion - Provides uniform sanding
Tool-free pad changes - Makes pad changes quick and hassle-free
Low-vibration design - Engineered for smooth running and operator comfort
Ergonomic soft-grip top - Designed for comfort
3-position pad - Extends paper and pad life

Manual Included, Corded

Powerful 5 Amp motor - For fast stock removal and a smooth finish, 18,000 RPM Chip ejection switch - Directs shavings left or right Electronically counterbalanced single-blade drum equipped with Bosch WoodrazorTM micrograin carbide blade Razor-sharp blade - Automatically positioned at ideal cutting angle Edge guide fence - Ensures consistent planing through entire work piece with a protective shield that covers the section of blade not in use

3.3 Amps, 590-950 SFPM - the power of a belt sander with the flexibility of a detail sander
• Variable speed control for fine finishing or fast stock removal
• Quick-change lever allows fast belt changes
• Low vibration design for comfortable working
• Control knob for precise belt adjustment

Manual & handle included

•Compact, lightweight design fits into tight areas
•High speed transmission delivers two speeds (0 - 450 / 0 - 1,500 RPM) for a range of fastening and drilling applications
•Ergonomic handle delivers comfort and control
•Heavy duty 1/2 in. ratcheting chuck with carbide inserts provides superior bit gripping strength
•Two-speed, all-metal transmission for increased run time and longer tool life
•16 position adjustable torque control for consistent screwdriving into a variety of materials with different screw sizes

Manual, 2 batteries, & charger included.

The Tracked Mud Buggy represents the ultimate in productivity, jobsite efficiency and ROI - with controls that are intuitive and easy-to-use, superior traction and maneuverability, high weight carrying capacity and a powerful engine.

You can install low voltage lighting or hidden pet fence quickly and easily with the EZ-Cable Installer. You are actually installing the wire or cable and backfilling while digging the trench with this machine. The CL3 Model installs wire 3.5″ deep.

JCB SKID STEER LOADER #225TQuick Specs

MUST HAVE CORRECT INSURANCE AND MEET THE TOWING QUALIFICATIONS BEFORE ITEM CAN BE RENTED.

Lift Path Radial
Net Engine Power 74 hp
55 kW
Operating Capacity 2,250 lbs 1,02 1 kg
Operating Weight 10,216 lbs 4,634 kg

Diesel Fuel Only - Tank Capacity /  27.2 Gallons

The largest of our compact track loader range to offer radial lift, the large platform 2,250 lb (1021 kg) rated operating capacity JCB 225T incorporates our unique Power Boom with exclusive side door entry design.

Designed for comfort, safety, economy, productivity and durability in Savannah, GA the 225’s 74 hp (55 kW) JCB  engine is durable and highly efficient.

The 225T has on average 60% better visibility and a 33% larger cab than competitive model compact track loaders, and there are a whole host of other benefits as well. Like ergonomic controls, an extremely tough Po

JCB Mini Excavator - Ideal for the small contractor or knowledgable homeowner.

MUST HAVE CORRECT INSURANCE AND MEET THE TOWING QUALIFICATIONS BEFORE ITEM CAN BE RENTED.

Enclosed cab with heat and A/C.

Quick Specs

Maximum Dig Depth: 11'4" 3.5m
Maximum Dump Height:  11'4" 3.5m
Operating Weight:  8,049lbs 3,651kg

• 25 HP (18.6 kW) Kohler Command Pro Series CH 740
• Patented, easy-to-use traction control system
• 34.5" width with bucket
• Turf friendly at only 1882 pounds

Rental rate includes choice of 36" bucket, 42" bucket or forks. Also available at additional rate:

• Auger Power Head Attachment
• Trencher Head Attachment
• Stump Grinder Attachment

MUST QUALIFY VEHICLE TOWING

REQUIRES 2" BALL

NiftyLift's road towable trailer mounted access platforms can be transported easily from site to site and set up quickly using manual or hydraulic outriggers*. They are built to be as light and compact as possible and offer an excellent working envelope for their size, with working heights up to 34'. Machine width 4'11". Platform load 500 lbs.

Great for finishing basements and garage floors or patching and repairing on larger jobs. The PT-36 has a diameter of 36" (92 cm) for smaller concrete slabs and hard to reach areas where your ride-on trowel cannot go.

Our Cut-n-Break method is the natural choice when you need to cut deep but want a machine with low tool and maintenance costs. The K 3000 Cut-N-Break enables you to cut as deep as 16" from one side. Suitable for flush cutting close to walls and floors as well as for smaller jobs like window openings where you want to avoid overcutting at the corners.